Call Us +65 6323 1721 | [email protected]
Call Us +65 6323 1721 | [email protected]
Nylon 6 is a type of polyamide, or nylon, that is made from a single monomer, caprolactam. It is a strong, tough, and durable plastic that has good resistance to heat and chemicals.
Nylon 6 is commonly used to make a wide range of products, including automotive parts, gears, bearings, and mechanical parts. It is also used in the manufacturing of clothing, sporting goods, and industrial machinery.
One of the main advantages of nylon 6 is its high strength and toughness. It is also a good electrical insulator and has good wear resistance, making it a good choice for use in mechanical components..
Nylon 6 is also easy to process and can be molded into a wide range of shapes and sizes. It is a popular choice for a variety of applications due to its strength, durability, and versatility.
| Test Description | Unit | Test Value | Specification | |
| Relative viscosity | - | 2.776- | 2.780 ± 0.07 | |
| Moisture | % | 0.032 | <0.6 | |
| Extractable | % | 0.28 | <0.6 | |
| Titanium dioxide | % | - | - | |
| Amino end-group | mmol/kg | 47.6 | 48.0 ± 4.0 | |
| Oxidationp | % | 06 | <1 | |
Nylon 66 is a type of polyamide, or nylon, that is made from a copolymer of hexamethylenediamine and adipic acid. It is a strong, tough, and durable plastic that has good resistance to heat, chemicals, and wear.
Nylon 66 is commonly used to make a wide range of products, including automotive parts, gears, bearings, and mechanical parts. It is also used in the manufacturing of clothing, sporting goods, and industrial machinery.
One of the main advantages of nylon 66 is its high strength and toughness. It is also a good electrical insulator and has good wear resistance, making it a good choice for use in mechanical components.
Nylon 66 is also easy to process and can be molded into a wide range of shapes and sizes. It is a popular choice for a variety of applications due to its strength, durability, and versatility.
| Properties | Unit | Typical Value | |
| Relative viscosity | - | 2.39 ± 0.05 | |
| Water content | mg/kg | ≤ 5000 | |
| Appearance | - | Transparent particle | |
| Particle size | g/100Pellets | 1.7 ± 0.3 | |
| Melt flow rate | g/10min | 145 | |
| -NH2 | mmol/kg | 32 ± 5 | |